ABC Cable Accessories
Es 6-8kN ADSS Suspension Wire Clamp for 16-95mm2 ABC Cable 1kv Overhead Electrical Power Fittings with IEC Standard
Product Overview
ES suspension clamp is specifically designed for suspending LV-ABC cables and insulated neutral messengers in 1kV overhead distribution systems. Made of weather-resistant aluminum alloy with black UV-protective plastic coating and hot-dip galvanized steel hardware, it provides reliable mechanical support and cable protection. The tool-free adjustable grip device accommodates conductor sizes from 16mm² to 95mm² with MBL up to 8kN. Supports straight line installation and line deviation angles up to 90 degrees. Standard compliant with NFC 33-040 and EN 50483-3.
Share the model, quantity, drawing, destination and project requirement for a focused response.
Product Details
Quick Specs
• Series: ES Series
• Models: ES54-14 / ES-1500 / ES-1500.1
• Cable Type: Single Core ABC Cable
• Conductor Range: 16-95mm2
• MBL: 6-8kN
• Rated Voltage: 1kV
• Material: Aluminum Alloy + PA66 Fiberglass
• Surface: Plastic Coating + Hot-Dip Galvanized
• Standard: NFC 33-040, EN 50483-3
• Series: ES Series
• Models: ES54-14 / ES-1500 / ES-1500.1
• Cable Type: Single Core ABC Cable
• Conductor Range: 16-95mm2
• MBL: 6-8kN
• Rated Voltage: 1kV
• Material: Aluminum Alloy + PA66 Fiberglass
• Surface: Plastic Coating + Hot-Dip Galvanized
• Standard: NFC 33-040, EN 50483-3
Technical Specifications
| Model | Conductor Cross-section(mm²) | Conductor Diameter(mm) | Breaking Load(kN) | Suspension Angle | Material |
|---|---|---|---|---|---|
| ES-14 | 25-95 | 5-14 | ≥8 | ≤60° | Insulated polymer + aluminum alloy |
| ES54-14 | 16-95 | 5-14 | ≥8 | ≤60° | UV-resistant fiberglass reinforced polymer |
Applications
workshop
Inquiry Now
Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.
Open Full Enquiry PageRelated Products
Jjc-95-70 Heavy Duty Insulation Piercing Connector Cable Clamp Hardware
JDG Insulated Dead End Clamp and ABC Cable Tension Clamp for Overhead Distribution Lines
Jjcd Corrosion Resistant Insulation Piercing Connector Earth Cable Clamp IPC Hardware for 1KV
Jbc10 PA66 Insulated Piercing Cable Clamp Fittings 2 Bolts 10-240 mm² Insulation Electrical Ipc Connector for 10kv
Xgu-1 40kN/70kN ADSS Suspension Wire Clamp for ABC Cable 35kv Overhead Electrical Power Fittings with IEC Standard
Jjc-5 Heavy Duty Insulation Piercing Connector Cable Clamp Hardware
Jbc PA66 Insulated Piercing Cable Clamp Fittings 1/2 Bolt 1.5-240 mm² LV Connector for 1kv
