Overhead Line Hardware
PAL Stainless Steel Cable Suspension Strain Tension 25-95mm² 10-18 kN Anchor Clamp for 10kv Overhead Optic Line with IEC
Product Overview
PAL Series Wedge Type Tension Clamp is aluminum alloy tension fitting for overhead insulated cables, featuring stable cable holding force, high breaking load and over 30 years service life for overhead distribution lines.
Share the model, quantity, drawing, destination and project requirement for a focused response.
Product Details
Core Parameters
Interface Type: Wedge Insulated Cable Tension Connector
Material: Forged aluminum alloy + rubber wedge
Connection Method: Wedge self-locking clamping
Surface Treatment: Natural aluminum finish
Manufacturing Process: Hot forging forming
Corrosion Resistance: Excellent corrosion resistance
Applicable Voltage: 10kV overhead lines
Hole Type: Hook hanging type
Operating Temperature: -40℃ – +80℃
Installation Method: Manual wedge fastening
Suitable Conductor Cross-section: 25-95 mm²
Conductor Outer Diameter Range: 8-18 mm
Rated Breaking Load: 10-18 kN
Interface Type: Wedge Insulated Cable Tension Connector
Material: Forged aluminum alloy + rubber wedge
Connection Method: Wedge self-locking clamping
Surface Treatment: Natural aluminum finish
Manufacturing Process: Hot forging forming
Corrosion Resistance: Excellent corrosion resistance
Applicable Voltage: 10kV overhead lines
Hole Type: Hook hanging type
Operating Temperature: -40℃ – +80℃
Installation Method: Manual wedge fastening
Suitable Conductor Cross-section: 25-95 mm²
Conductor Outer Diameter Range: 8-18 mm
Rated Breaking Load: 10-18 kN
Product Features
- Self-locking wedge structure ensures firm cable grip
- Rubber insert avoids cable sheath damage
- Lightweight design for quick field installation
- Full size range covers common insulated cables
Product Structure
Applications
• Terminal tension fixing of overhead insulated wires
• Rural overhead power distribution lines
• Short-span overhead power transmission projects
• Pole-mounted low and medium voltage cable wiring
workshop
Inquiry Now
Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.
Open Full Enquiry PageRelated Products
PAM Suspension Strain Tension 16-35 mm² Wire Clip 3-8 kN Anchor Clamp for Overhead Optic Line with IEC
Jbl-50-240 Aluminum Parallel Groove Cable Clamp
Jbt-16-120 Copper Electrical Parallel Groove Wire Clamp Outdoor Distribution Cable with SGS Approved
JH-3 Series Parallel Groove Clamp H-Type Aluminum Alloy Splicing Fitting for Overhead Line 16-240mm2
Jyt-150-20 Electrical Anchor Clamp for Utility Transmission Hardware with ISO9001 Certified
NX Galvanized Steel Galvanized Tension Clamp Dead End Anchor Clamp
Ny Hydraulic Compression 2 Bolted Dead End Clamp Tension Anchor Clamp for 70-630 mm² ACSR Conductors
