ABC Anchor Clamps
Ny Hydraulic Compression Bolted Dead End Clamp Tension Anchor Clamp for 70-630 mm² ABC ACSR Conductors
Product Overview
NY Series Compression Strain Clamp is aluminum dead-end tension fitting for LGJ ACSR overhead conductors, installed by hydraulic crimping, used for wire anchoring on transmission towers, service life over 30 years.
Share the model, quantity, drawing, destination and project requirement for a focused response.
Product Details
Core Parameters
Material: Extruded aluminum alloy tube + galvanized steel bolts & anchor loop
Service Life: Over 30 Years
Connection Method: Hydraulic compression crimping
Surface Treatment: Aluminum anti-oxidation finish, steel parts hot-dip galvanized
Corrosion Resistance: Galvanized steel components
Applicable Voltage: High voltage overhead transmission lines
Operating Temperature: -40-+105℃
Installation Method: Hydraulic crimp tool compression
Applicable Conductor: LGJ ACSR overhead conductors
Applicable Wire Cross-section: 70-630 mm²
Rated Grip Strength: 22.2-183.3 KN
Material: Extruded aluminum alloy tube + galvanized steel bolts & anchor loop
Service Life: Over 30 Years
Connection Method: Hydraulic compression crimping
Surface Treatment: Aluminum anti-oxidation finish, steel parts hot-dip galvanized
Corrosion Resistance: Galvanized steel components
Applicable Voltage: High voltage overhead transmission lines
Operating Temperature: -40-+105℃
Installation Method: Hydraulic crimp tool compression
Applicable Conductor: LGJ ACSR overhead conductors
Applicable Wire Cross-section: 70-630 mm²
Rated Grip Strength: 22.2-183.3 KN
Product Features
- Hydraulic crimp structure delivers high tensile holding force
- Galvanized steel accessories resist outdoor corrosion
- Two structural styles match different tower installation demands
- Full size range covers 70-630 mm² LGJ overhead wires
- Stable load capacity meets international power grid standards
Product Structure
Performance & Dimensions
Applications
• Dead-end fixing of LGJ ACSR overhead conductors on transmission towers
• Overhead line tension anchoring for power grid construction
• Old line renovation terminal connection projects
• Outdoor high voltage overhead tension bearing fittings
Inquiry Now
Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.
Open Full Enquiry PageRelated Products
E895 1.5kN ADSS Suspension Wire Clamp for ABC Cable 4-9mm² Overhead Electrical Power Fittings with IEC Standard
Nxjl-1 Wedge Type Insulated Tension Clamp ABS Cable Anchor Dead End Clamp
Jne Series Insulated Tension Clamp, Anchor Clamp for ADSS Fiber Optic Cable with IEC Standard
Ttd431fj Heavy Duty Insulation Piercing Connector Cable Clamp Hardware
Jbc10 PA66 Insulated Piercing Cable Clamp Fittings 2 Bolts 10-240 mm² Insulation Electrical Ipc Connector for 10kv
Jbc PA66 Insulated Piercing Cable Clamp Fittings 1/2 Bolt 1.5-240 mm² LV Connector for 1kv
Overhead Line Tension Clamp, Nes Series Electrical Power Fitting for ABC Cable with ISO Certification
