Insulators
U210BP Brown Porcelain Suspension Disc | Different Cap View
Product Overview
A different, factory-photographed cap view of the U210BP brown porcelain suspension disc already listed in this catalogue. This is the same model, not a new electrical rating. The model drawing specifies 210 kN failing load, 280 mm diameter, 170 mm spacing and 405 mm creepage.
Share the model, quantity, drawing, destination and project requirement for a focused response.
Technical Parameters
| Parameter | Unit | Value |
|---|---|---|
| IEC class | U210BP | |
| Coupling size | 20 | |
| Diameter | mm | 280 |
| Spacing | mm | 170 |
| Creepage distance | mm | 405 |
| Electro-mechanical failing load | kN | 210 |
| Impact strength | N·m | 10 |
| Routine proof test load | kN | 105 |
| Dry power-frequency withstand | kV | 75 |
| Wet power-frequency withstand | kV | 45 |
| Positive impulse flashover | kV | 125 |
| Negative impulse flashover | kV | 130 |
| Lightning impulse withstand | kV | 110 |
| Power-frequency puncture voltage | kV | 120 |
| Test voltage RMS to ground | kV | 10 |
| Maximum RIV at 1000 kHz | µV | 50 |
| Approximate net weight | kg | 11.8 |
Inquiry Now
Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.
Open Full Enquiry PageRelated Products
ANSI 52-9b Electrical Ceramic Suspension Disc Insulator 44kN Porcelain 11kv-33kv Insulator
ANSI 52-1 Electrical Ceramic Suspension Disc Insulator 44kN Porcelain 11kv Insulator
ANSI 52-3 Porcelain Suspension Insulator | Brown and White Shown
ANSI 54-1 C29.5 Electrical Ceramic Tension Insulator 45.5 kN Porcelain Insulator
Fxbw-15/100 Composite Polymeric Electrical Suspension Rubber Insulator
ANSI 55-2 C29.5 Porcelain Pin Type Insulator Ceramic Electrical Low-Voltage-Insulator
ANSI 55-5 Porcelain Pin Insulator for Overhead Lines
