JJC-10-95/70 Insulation-Piercing Connector
Product Overview
JJC-10-95/70 insulation-piercing connector for an insulated overhead-line branch. The existing catalogue table lists main and tap conductor ranges and application voltage; verify the exact cable construction, insulation, installation method and test evidence before selection.
Share the model, quantity, drawing, destination and project requirement for a focused response.
Product Details
The product gallery shows a two-bolt insulation-piercing connector housing. The existing JJC-10-95/70 catalogue table lists main and branch conductor ranges and an application voltage; these are selection references, not proof that every cable combination or installation is approved. Confirm conductor material and construction, insulated outside diameter, compatible clamp variant, tightening procedure and test records for the intended branch. The earlier 30-year service-life, temperature and material claims are not established by the current photos or table.
Product Features
- Two-bolt connector housing visible in the gallery
- Compare both main and branch conductors with the model-specific table
- Request installation instructions and relevant electrical tests
Performance & Dimensions
Technical Specifications
| Model | Suitable Main Conductor Cross Section(mm²) | Suitable Branch Conductor Cross Section(mm²) | Application Voltage(kV) |
|---|---|---|---|
| JJC-10-95/70 | 25-95 | 16-70 | 10 |
Applications
Branch connection on an insulated overhead line only where the selected conductor combination, installation method and project requirements are supported by the model drawing and test documents.
Workshop
Inquiry Now
Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.
Open Full Enquiry PageRelated Products
NXJL Series Insulated Wedge Anchor Clamps
JJCD10 Piercing Clamp with Earthing Hook
Anchor Clamp Strain Clamp Nxjg Series Wedge Insulated Tension Clamp for 10kv Overhead Line
Jjc-5 Heavy Duty Insulation Piercing Connector Cable Clamp Hardware
JNS Series Anchor Clamp for ABC Aerial Bundled Cables
Jbc PA66 Insulated Piercing Cable Clamp Fittings 1/2 Bolt 1.5-240 mm² LV Connector for 1kv
Jbc10 PA66 Insulated Piercing Cable Clamp Fittings 2 Bolts 10-240 mm² Insulation Electrical Ipc Connector for 10kv
