Construction & Cooling Design
Coolant flows through holes drilled directly into the solid plate. Channel ends are sealed and the mounting surfaces and connections are machined to the drawing. This construction uses straight passages rather than a large-area welded cover.
Technical Specifications
Values below describe the available configuration. Final dimensions and operating conditions are defined in the approved drawing and order specification.
| Property | Typical range / option |
|---|---|
| Materials | Aluminium 6061 / 6082; copper C1100 |
| Plate thickness | 10–60 mm, customizable |
| Channel diameter | Ø3–Ø12 mm |
| Channel quantity | 2–20+ |
| Layout | Parallel straight channels |
| Surface flatness | ≤0.05 mm |
| Working pressure | Up to 1.5–3.0 MPa, configuration dependent |
| Operating temperature | −40°C to 120°C |
| Coolants | Water / glycol / coolant oil |
| Connections | G1/4, NPT or custom |
Applications
- IGBT power modules
- SiC inverter equipment
- Energy storage
- Industrial lasers
Configure Your Cold Plate
Send SUNENG your installation drawing or a marked-up sketch, quantity and delivery destination. Identify the component contact areas, port locations, mounting holes and dimensions that must remain fixed.
For thermal selection, include heat load, coolant composition, inlet temperature, available flow and allowable pressure drop. Specify any inspection records needed for sample acceptance. Use the enquiry form below or the full enquiry page to discuss drawings and project requirements.
Ordering Questions
What is needed to confirm fit?
Provide the equipment model and revision together with a mounting drawing. We will use these to define the configuration for quotation.
Can the connections be changed?
Include the required thread or coupling, hose routing and available installation space in your enquiry so they can be reviewed with the plate design.
