Insulators
C4-80 II UHL Porcelain Post Insulator
Product Overview
10 kV C4-80 II UHL porcelain post insulator, 125 mm shell diameter.
Share the model, quantity, drawing, destination and project requirement for a focused response.
Technical Parameters
| Parameter | Unit | Source value |
|---|---|---|
| Model | C4-80 II UHL | |
| Rated voltage | kV | 10 |
| Minimum bending strength | kN | 4 |
| Construction height | mm | 215 |
| Shell diameter | mm | 125 |
| Creepage distance (drawing) | mm | 300 |
| Upper flange dimension | mm | 36 |
| Lower flange dimension | mm | 70 |
| Lightning impulse test voltage | kV | 80 |
| Approximate weight | kg | 2.6 |
Source Data Note
The source listing table prints a creepage distance of 30 mm; its drawing specifies 300 mm. The drawing value is shown above.
Inquiry Now
Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.
Open Full Enquiry PageRelated Products
ANSI 57-3 C29.6 Electrical Ceramic Line Post Insulators Porcelain 33kv-45kv Insulator
Fxbw-22/70 Composite Polymeric Electrical Rubber Insulator Polymer Insulator
24PC(600) Porcelain Line Post Insulator | White Photo
Fxbw-15/100 Composite Polymeric Electrical Suspension Rubber Insulator
ANSI 55-5 Porcelain Pin Insulator for Overhead Lines
VHD-10F / SHF-10MO Porcelain Pin Insulator
ANSI 57-2 Porcelain Line Post Insulator | 559 mm Creepage
