Insulators
1.2 kV 250 A Secondary Porcelain Transformer Bushing
Product Overview
White porcelain secondary transformer bushing with eye-bolt terminal and brass stud. The dedicated factory drawing is labeled 1.2 kV / 250 A and shows the same fitted profile as the selected single-unit photographs. Dimensions are taken from that drawing; the source provides no separate electrical test table.
Share the model, quantity, drawing, destination and project requirement for a focused response.
Technical Parameters
| Parameter | Unit | Value |
|---|---|---|
| Nominal voltage (drawing) | kV | 1.2 |
| Nominal current (drawing) | A | 250 |
| Overall height excluding side terminal | mm | 117 |
| Lower section length | mm | 85 |
| Upper terminal extension | mm | 76 |
| Stud thread | 1/2 in − 13 |
Inquiry Now
Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.
Open Full Enquiry PageRelated Products
ANSI 57-2 Porcelain Line Post Insulator | 559 mm Creepage
ANSI 55-5 Porcelain Pin Insulator for Overhead Lines
ANSI 52-1 Electrical Ceramic Suspension Disc Insulator 44kN Porcelain 11kv Insulator
ANSI 52-4 Clevis Suspension Porcelain Insulator | Type B
VHD-10F / SHF-10MO Porcelain Pin Insulator
ANSI 57-3 C29.6 Electrical Ceramic Line Post Insulators Porcelain 33kv-45kv Insulator
Fxbw-22/70 Composite Polymeric Electrical Rubber Insulator Polymer Insulator
