RTX 5090 GPU Liquid Cooling Block
- RTX 5090 application
- 600 W listed TDP
- UQD02 quick-disconnect fittings
Product Overview
A dedicated RTX 5090 liquid cooling assembly with a copper heat-transfer structure, UQD02 quick-disconnect fittings and PTFE corrugated hose for integration into a GPU coolant loop.
Share the model, quantity, drawing, destination and project requirement for a focused response.
Construction & Cooling Design
The copper cooling structure transfers heat into internal liquid passages. The assembly uses friction stir welding and a mounting interface designed around the graphics-card layout. Check the exact PCB revision and component positions against the supplied drawing.
Technical Specifications
Values below describe the available configuration. Final dimensions and operating conditions are defined in the approved drawing and order specification.
| Property | Configuration |
|---|---|
| GPU platform | RTX 5090 |
| Dimensions | 291.3 × 125 × 16.9 mm |
| Listed cooling capacity (TDP) | 600 W |
| Connection | UQD02 quick-disconnect fitting |
| Hose | PTFE corrugated hose |
| Manufacturing | Friction stir welding (FSW) |
| Heat-transfer structure | Copper |
Product Views
Dimension Drawing
Check the illustrated dimensions and mounting pattern against the exact equipment revision before ordering.
Applications
- AI computing
- Rendering workstations
- Scientific computing
- GPU acceleration systems
Configure Your Cold Plate
Send SUNENG your installation drawing or a marked-up sketch, quantity and delivery destination. Identify the component contact areas, port locations, mounting holes and dimensions that must remain fixed.
For thermal selection, include heat load, coolant composition, inlet temperature, available flow and allowable pressure drop. Specify any inspection records needed for sample acceptance. Use the enquiry form below or the full enquiry page to discuss drawings and project requirements.
Ordering Questions
What is needed to confirm fit?
Provide the equipment model and revision together with a mounting drawing. We will use these to define the configuration for quotation.
Can the connections be changed?
Include the required thread or coupling, hose routing and available installation space in your enquiry so they can be reviewed with the plate design.
Inquiry Now
Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.
Open Full Enquiry Page
