Prefabricated Substations

ZGS Series Combined Transformer Substation, American Type

ZGS Series

Product Overview
Designed for 7.2/12kV ring main, dual-power, and terminal power supply systems, integrating HV power distribution, metering, compensation, and protection functions. The HV side features multi-position load switches and fuses, while the LV side supports customized power distribution modules (control devices, reactive power compensation, and energy metering).
The equipment supports indoor/outdoor installation, widely applied in industrial parks, commercial centers, high-rise buildings, and other scenarios.

Discuss This Product Request Documents

Share the model, quantity, drawing, destination and project requirement for a focused response.

Model Designation

Product Features

● Compact Design: Volume is only ~1/3 of domestic European-style substations with the same capacity.

● Fully Sealed & Insulated: Eliminates the need for insulation clearances, ensuring personal safety.

● Flexible Application: Suitable for both ring main and terminal systems with easy conversion, enhancing power supply reliability.

● Load-bearing Cable Joints: Operable at 200A load current, functioning as load switches in emergencies with isolator switch features.

● Dual Fuse Protection: Reduces operation costs. Plug-in fuses are thermal-magnetic (sensitive to temperature & current).

● Delta/Wye Connection & Column Structure: Offers high voltage quality, neutral point non-shift, non-heating enclosure, low noise, and good lightning protection.

Technical Specifications

No.	Items	Unit	Data
1	Rated voltage	kV	10/0.4 (HV/LV)
2	Maximum operating voltage	kV	12 (HV)
3	Rated frequency	Hz	50
4	Rated capacity	kVA	50-1600
5	1 min power frequency withstand voltage	kV	35
6	Lightning impulse withstand voltage	kV	50
7	Cooling method		ONAN
8	High voltage backup fuse breaking current	kA	50
9	Plug-in fuse breaking current	kA	25
10	Ambient temperature	℃	-35~+40
11	Allowable temperature rise of coil	℃	65
12	No-load voltage regulation		±5% or ±2×2.5%
13	Noise level	dB	50
14	Protection level		IP43

Operating Conditions

● Altitude: ≤1000m (special design required for higher altitudes)

● Wind Pressure: ≤10Pa (equivalent to 35m/s)

● Humidity: Daily avg. ≤95%, monthly avg. ≤90%

● Temperature: -25°C to +40°C

● Vibration Resistance: Horizontal acceleration 0.4m/s²; vertical acceleration 0.15m/s²

● Seismic Intensity: 8 degrees

● Installation Inclination: ≤3°

● Environmental Requirements: Free from corrosive/flammable gases, water vapor pollution; no severe vibration at installation site.

Inquiry Now

Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.

Open Full Enquiry Page

ZGS Series Combined Transformer Substation, American Type

Model Designation

Product Features

Technical Specifications

Operating Conditions

Inquiry Now

Related Products

D11-M Series Single-Phase Oil-Immersed Transformer, Pole Mounted Transformer

YBH Series Prefabricated Substation (Chinese Box Type)

YBW Series Outdoor Compact Prefabricated Transformer Substation for Kenya and Tanzania Power Distribution Projects

S11/13/20/22-M▪D Series Three-Phase Oil-Immersed Underground Transformer

S(B)11/13/20/22-M Series Outdoor Using Three Phase Oil Immersed Distribution Transformer

YBD Series Landscape Type Underground Prefabricated Substation

SZ11/13/20/22-M Series 35kv Three-Phase Oil-Immersed Transformer

Prefabricated Electrical Cabin for Saudi Arabia and UAE Solar Power and Battery Energy Storage Projects