Insulator Link Fittings

UF-10 U-Type Clevis Fitting for Insulator Hardware

Product Overview

UF-10 U-type clevis fitting for overhead-line hardware. Compare catalogue dimensions and listed load with the approved drawing and test documents.

Discuss This Product Request Documents

Share the model, quantity, drawing, destination and project requirement for a focused response.

Product Details

The UF series catalogue lists U-type clevis fittings from UF-7 to UF-50 for line-hardware connections. The table shows dimensions, listed failure loads and weights by model; these figures require confirmation against the selected part drawing and test record.

Before specifying a fitting, check the mating insulator and link geometry, pin or bolt details, material, surface finish, mechanical rating and installation procedure. The catalogue alone does not establish IEC, GB or DL/T compliance for each delivered item.

Product Features

U-type connection geometry shown in the product photos. Confirm mating dimensions, material, surface finish, hardware and mechanical test evidence for the selected UF model.

Product Structure

Technical Specifications

Model	C (mm)	M (mm)	d (mm)	H (mm)	R (mm)	Specified Failure Load (kN)	Weight (kg)
UF-7	20	16	16	60	10	70	0.50
UF-10	22	18	18	70	11	100	0.54
UF-12	24	22	20	80	12	120	0.96
UF-16	26	24	22	90	13	160	1.47
UF-20	30	27	24	100	15	200	2.20
UF-25	34	30	26	110	17	250	2.79
UF-30	38	36	30	130	19	300	3.70
UF-40	42	42	36	150	21	400	7.00
UF-50	44	42	36	150	22	500	7.00