Insulators
1.2 kV 800 A ANSI Secondary Bushing | Silver Terminal View
Product Overview
Alternate factory photograph of the already listed 1.2 kV / 800 A porcelain secondary transformer bushing, showing the silver-coloured four-hole terminal upright. This is the same rating, not a 30 kV / 800 A model. The dedicated drawing identifies 1.2 kV / 800 A and supports the dimensions below; the source marketing heading says 30 kV / 800 A but conflicts with that drawing.
Share the model, quantity, drawing, destination and project requirement for a focused response.
Technical Parameters
| Parameter | Unit | Value |
|---|---|---|
| Nominal voltage (drawing) | kV | 1.2 |
| Nominal current (drawing) | A | 800 |
| Overall height | mm | 287 ± 4 |
| Terminal width | mm | 90 ± 1 |
| Terminal hole spacing | mm | 44.5 ± 1 |
| Terminal hole diameter | mm | 14.5 ± 0.5 |
| Stud thread | M24 × 2 |
Inquiry Now
Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.
Open Full Enquiry PageRelated Products
IPU-10/630-7.5 Porcelain Transformer Bushing
C4-80 II-M Porcelain Post Insulator
ANSI 55-2 C29.5 Porcelain Pin Type Insulator Ceramic Electrical Low-Voltage-Insulator
ANSI 57-1 Porcelain Line Post Insulator | 356 mm Creepage
ANSI 52-1 Clevis Suspension Porcelain Insulator | Type B
ANSI 54-3 Brown Electrical Porcelain Tension Strain Insulator
ANSI 57-2 Porcelain Line Post Insulator | 559 mm Creepage
