Insulators
1.2 kV 800 A ANSI Secondary Porcelain Transformer Bushing
Product Overview
White porcelain ANSI secondary transformer bushing with four-hole copper terminal. The factory dedicated drawing identifies 1.2 kV / 800 A and shows the same assembled profile as the product photographs. Dimensions below are read from that drawing; no separate electrical test table is supplied.
Share the model, quantity, drawing, destination and project requirement for a focused response.
Technical Parameters
| Parameter | Unit | Value |
|---|---|---|
| Nominal voltage (drawing) | kV | 1.2 |
| Nominal current (drawing) | A | 800 |
| Overall height | mm | 287 ± 4 |
| Terminal width | mm | 90 ± 1 |
| Terminal hole spacing | mm | 44.5 ± 1 |
| Terminal hole diameter | mm | 14.5 ± 0.5 |
| Stud thread | M24 × 2 |
Inquiry Now
Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.
Open Full Enquiry PageRelated Products
C4-80 II-M Porcelain Post Insulator
ANSI 57-3 Porcelain Line Post Insulator | 737 mm Creepage
ANSI 57-1 Porcelain Line Post Insulator | 356 mm Creepage
ANSI 55-5 Porcelain Pin Insulator for Overhead Lines
ANSI 57-3 C29.6 Electrical Ceramic Line Post Insulators Porcelain 33kv-45kv Insulator
ANSI 52-1 Electrical Ceramic Suspension Disc Insulator 44kN Porcelain 11kv Insulator
24PC(600) Porcelain Line Post Insulator | White Photo
