Insulators
T1 15 kV 160 A Porcelain Bushing Body | Oblique End View
Product Overview
Alternate factory photograph of the same T1 15 kV / 160 A porcelain bushing body: this oblique end view is a genuinely different original camera angle from the existing upright main image. The matched T1 drawing confirms the 278 mm body length and 280 mm creepage; no separate electrical test claim is made.
Share the model, quantity, drawing, destination and project requirement for a focused response.
Technical Parameters
| Parameter | Unit | Value |
|---|---|---|
| Source series-table configuration | T1 / 15 kV / 160 A | |
| Overall length (drawing) | mm | 278 +10 / −6 |
| Lower section length (drawing) | mm | 110 +5 / −2 |
| Creepage distance (drawing) | mm | 280 |
| Maximum shed diameter (drawing) | mm | 99 +2 / −2 |
| Glaze (drawing note) | Brown |
Inquiry Now
Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.
Open Full Enquiry PageRelated Products
ANSI 54-3 Brown Electrical Porcelain Tension Strain Insulator
ANSI 57-2 Porcelain Line Post Insulator | 559 mm Creepage
ANSI 53-2 Porcelain Spool Insulator | 79 × 76 mm
ANSI 52-4 Clevis Suspension Porcelain Insulator | Type B
ANSI 52-3 Porcelain Suspension Insulator | Brown and White Shown
ANSI 57-2 Porcelain Line Post Insulator | 559 mm Creepage
ANSI 55-2 C29.5 Porcelain Pin Type Insulator Ceramic Electrical Low-Voltage-Insulator
