Insulators
18 kV 25 A ANSI Primary Porcelain Transformer Bushing
Product Overview
White porcelain ANSI primary transformer bushing with eye-bolt terminal and flexible copper lead. The factory model drawing specifies 18 kV / 25 A and matches the eight-shed assembled product photos. Published dimensions come from the dedicated drawing; no separate electrical test table is supplied.
Share the model, quantity, drawing, destination and project requirement for a focused response.
Technical Parameters
| Parameter | Unit | Value |
|---|---|---|
| Nominal voltage (drawing) | kV | 18 |
| Nominal current (drawing) | A | 25 |
| Drawing length excluding flexible lead | mm | 398 |
| Lower insertion length | mm | 184 |
| Maximum shed diameter | mm | 100.8 |
| Lower stem diameter | mm | 54.9 |
| Flexible lead length (drawing note) | mm | 450 |
Inquiry Now
Send the model, drawing, BOM or project specification. Our team will respond around the actual selection points.
Open Full Enquiry PageRelated Products
ANSI 52-1 Electrical Ceramic Suspension Disc Insulator 44kN Porcelain 11kv Insulator
ANSI 54-3 Brown Electrical Porcelain Tension Strain Insulator
ANSI 52-3 Porcelain Suspension Insulator | Brown and White Shown
ANSI 55-2 C29.5 Porcelain Pin Type Insulator Ceramic Electrical Low-Voltage-Insulator
ANSI 57-4 Porcelain Line Post Insulator | 1,015 mm Creepage
C4-80 II-M Porcelain Post Insulator
ANSI 52-9 Clevis Suspension Porcelain Insulator | Type B
